Recommended installation height: 90-120cm from the ground
Mounting hole spacing: Adjustable from approx. 13.5 to 16.0 cm
Features#Stainless steel shower rod#
Painted finish to prevent scratches and fading
#Stainless steel overhead spray#
Stainless steel material, corrosion resistant and rust resistant
#Stainless steel hand sprayer#
Provides a fine and smooth water flow, and is not prone to clogging.
#Top spray height adjuster#
Allows free adjustment of top spray height
#Adjustable hand sprayer stand#
Height adjustable, angle adjustable
#ABS Storage Table#
Adjustable height for convenient storage
#Explosion-proof shower hose#
Safe and explosion-proof, high temperature resistant
#Smooth Handle#
Left hot, right cold, one-button switching
#Thickened refined copper body#
The refined copper body is cast, highly corrosion-resistant, and leak-proof.
#Bathroom Space, Match Your Style Anytime#
Compatible with various home décor styles, naturally beautiful, easy to master.
Package
1 x Thermostatic Shower Mixer Valve
1 x Shower Head
1 x Handheld Shower And Hose
1 x Riser Rail, Wall Bracket & Fittings
OPERATING METHODS1.Upward opening of handle can increase water discharge while downward opening of handle can cause decreased water discharge, finally closing water flow.2.After upward opening of handle, as a rule, leftward turning adjustment can increase hot water supply and rightward turning adjustment can result in increased cold water supply. lf hot and cold water pipe is connected reversedly during installation, something opposite might happen compared to the above circumstances.3.When the handle of triad faucet is opened upwardly, under normat condition water current flows out from the bubble former: Yieding water of spraying nozzle can be switched by pulling up tension lever head, then bubble former stops water flow.4.During operating, it is only required to lightly rotate the handle of switch moving at 90℃ to specific position. Do not open and close with powerful strength to avoid the damage due to excessive overexertion.5.Under low water source pressure, simply unscrew bubble former to takeoff inner throttling sheet for increasing faucet water discharge. When,throttling sheet can be installed again water pressure is normal.6.After using this product for a period of time, all filter screens must betaken down to be washed before being installed again.MAINTENANCE
In order to keep the brightness of faucet,please follow simple maintaining instructions below:
#Rinse faucet with clean water#Wipe and dry faucet with soft cotton cloth;#Do not any abrasive acidic shaggy detergent#Do not clean faucet with polished abrading agent, soap,coarse cloth or paper handkerchief#Regular cleaning of faucet can reduce the needs of large scale cleaning and polishing work.
If large-scale cleaning work is needed,please follow the procedures below:
1 .Try to clear surface dirt and dirty layer with clean water and soft cotton cloth:2.Any kind of the following detergents can be used to clean surface dirty layer and stain:#Mild liquid detergent;#Colorless glass detergent#Mild nonacid non-abrasive liquid or completely soluble powdery deterent(mixing according to manufacturing instructions)#Non-abrasive polishing liquid.